Picking an air conditioner is not like picking a T-shirt. You can’t just guess “Medium” and hope it fits. If your aircond is too small, it will run non-stop and never cool your room. If it’s too big, it will cool too fast without removing humidity, leaving your room cold and clammy. Both mistakes lead to high electricity bills and an uncomfortable home.
If your aircond is too small, it will run non-stop and never cool your room. If it’s too big, it will cool too fast without removing humidity, leaving your room cold and clammy. Both mistakes lead to higher electricity bills and an uncomfortable home.
The Golden Rule: It’s All About BTU (and your room size)
Forget about “1-horsepower” or “2-horsepower” for a moment. The real measure of cooling power is the British thermal unit (BTU). Think of BTU as the aircond’s “muscle.” The bigger your room, the more “muscle” you need.
Here is the simplest way to find out how much muscle your room needs:
Step 1: Measure Your Room
Grab a measuring tape. You need to know:
- Length of the room (in feet)
- Width of the room (in feet)
- Height of the ceiling (in feet)
Example: A standard bedroom might be 12 feet long, 10 feet wide, and 9 feet high.
Step 2: Do Simple Math (The Magic Formula)
Use this formula to calculate the volume of your room:
Length x Width x Height = Room Volume (in cubic feet)
Example: 12 ft x 10 ft x 9 ft = 1,080 cubic feet.
Step 3: Use the Standard BTU Rule for Malaysia
In Malaysia’s hot and humid climate, a good rule of thumb is:
You need approximately 40 to 60 BTU per cubic foot of space.
- Use 40 BTU/cu ft for rooms with good shade, fewer windows, or less heat from appliances.
- Use 60 BTU/cu ft for sun-facing rooms, kitchens, rooms with large windows, or spaces with lots of people and electronics.
Example for a shaded bedroom: 1,080 cu ft x 40 BTU = 43,200 BTU needed.
Step 4: Match BTU to Common “Horsepower” (HP) Sizes
Once you know the BTU you need, match it to the common sizes you see in stores. Here’s a handy table:
| Room Size (Approx.) | Recommended BTU | Aircond “Horsepower” (HP) | Best For |
| Small Room (100-150 sq ft) | 9,000 – 12,000 BTU | 1 HP | Small bedroom, study room |
| Medium Room (150-250 sq ft) | 13,000 – 18,000 BTU | 1.5 HP | Master bedroom, medium living room |
| Large Room (250-400 sq ft) | 19,000 – 24,000 BTU | 2 HP | Large living room, open-plan area |
| Very Large Room / Small Hall (400-550 sq ft) | 24,000 – 30,000 BTU | 2.5 HP | Large hall, open-concept space |
Important: Our example bedroom needed 43,200 BTU. This is much higher than the table shows because our volume calculation (including height) is more accurate than just looking at floor area. This is why measuring is crucial!
What Happens If You Choose the Wrong Size?
- Too Small (Low BTU): Your aircond will work overtime. It will never reach the set temperature, leading to high electricity bills, wear and tear, and a hot, uncomfortable room.
- Too Big (High BTU): It will cool the room too quickly and shut off. This short cycling means it won’t run long enough to pull moisture from the air (dehumidify). You’ll get a cold, damp room that feels sticky, and you’ll waste energy turning the unit on and off constantly. For the most efficient operation, a professional installation Service is key to ensuring the unit is set up correctly for its capacity.
Other “Room Recipe” Ingredients to Consider
Your room is unique. After calculating your base BTU, add more “muscle” if your room has:
- Sunlight: If the room gets direct afternoon sun, add 10% more BTU.
- People: For more than 2 regular occupants, add 600 BTU per extra person.
- Kitchen Heat: If it’s a kitchen, add 4,000 BTU to handle the heat from cooking.
- Appliances: For rooms with many computers or TVs, add extra cooling power.
Simple “No-Math” Quick Check
If you want a rough estimate without a calculator:
- Measure just your floor area: Length (ft) x Width (ft).
- For a bedroom, you usually need about 1 HP for every 150 square feet.
- For a sunny living room, you might need 1 HP for every 120 square feet.
Remember: This quick method is less accurate. Using the BTU and volume method (Steps 1-3) is always best for getting it right.
When Should You Call a Professional?
While this guide helps you make a smart choice, a final site survey by a technician is always recommended before you buy. This is especially important for:
- Odd-shaped rooms (L-shaped, very high ceilings).
- Open-concept living areas.
- Choosing between a single powerful unit and multiple smaller ones.
An expert from a trusted service like AC Fix can confirm your calculations, check your electrical wiring, and recommend the perfect brand and model. A correct aircond installation is just as important as the size you choose.
